Quest Scuba Tector
The Quest Scuba Tector is the perfect metal detector for the holiday that you and your children will have a lot of fun with. Ideal for detecting the smallest objects on the beach and in the water. Ideal for snorkeling and even diving at depths of up to 60 meters!
Us the Scuba Tector to search in the most challenging conditions in salt and fresh water, mud, sand and highly mineralized soils - and anywhere the big coil can't reach. The Quest Scuba Tector is pressure-resistant up to 60 meters and completely waterproof! With its search frequency of 95 kHz, the Scuba is very sensitive to the smallest pieces of jewelry.
Secure payment : Paypal, Swissbilling, Twint or bank transfer .
and throughout Europe
Product return within 14 days
The Quest Scuba Tector is the perfect metal detector for the holiday that you and your children will have a lot of fun with. Ideal for detecting the smallest objects on the beach and in the water. Ideal for snorkeling and even diving at depths of up to 60 meters!
Us the Scuba Tector to search in the most challenging conditions in salt and fresh water, mud, sand and highly mineralized soils - and anywhere the big coil can't reach. The Quest Scuba Tector is pressure-resistant up to 60 meters and completely waterproof! With its search frequency of 95 kHz, the Scuba is very sensitive to the smallest pieces of jewelry.
Different detection signals
You can feel the vibration, see the LED, and even hear where metal is buried through a pulsating sound. You can also adjust the sensitivity/search depth in 4 levels.
Diver Mode
If you want to dive several meters deep, you can put the Quest Scuba Tector into diver mode by pressing a button. This mode ensures that the 2 push buttons are not pressed by the pressure underwater. You can start the underwater search by turning the device upside down three times.
Attention: Due to this procedure for activating the underwater search, you will hear a slight ticking noise when turning the device, so this is not a defect!
Built-in lithium battery The Quest Scuba Tector has a built-in 1000 mAh lithium battery
and can be easily recharged with the included USB cable.
Design
The Scuba Tector is available in two versions, in subtle black or in eye-catching orange, which is easier to spot if lost. With a total length of 42 cm and a weight of 380 g, the Scuba fits in any pocket or pouch. The perfect companion for any adventure!
Tech Specs
Protection | 200FT / 60M under fresh or saltwater |
Dimensions | L 16.5" / 42CM, W 3.9"/10CM, H 2.4"/ 6CM |
Weight | 11.6oz / 330 gram |
Coil | 5"x4" / 13x10cm mono coil |
Battery | Built in 3.7V 500mAh Li-Poly Battery |
Working Method | Pulse induction. No falsing in saltwater and black sand enviorment |
Operating Frequency | 95 kHz |
Tuning | Automatic |
Indicators | Audio / Vibration LED Beam Lights Response will be intense when probe close to objects. |
Controls |
Power switch (On / Off) Mode control(Vibration/Buzzer/ V+B) LED flashlight (Once power on) Two control modes: snorkel dive mode(0~8M), dive mode(8~60M |